ScreenPrintingOnline.com

<<Previous page

 

 
Vitran is—simply put—the ultimate in UV curing technology.

UV energy loss typical of other curing systems results in higher costs and slower running, hotter operating units. M&R met the problem head on by designing Vitran, with its patented (#5,216,820) dual-reflector system.

Vitran uses a secondary reflector (positioned at the top of the primary reflector) to capture the energy that normally bounces down onto the lamp. The secondary reflector redirects this UV energy onto the substrate for faster curing at the same cost in energy.

The “dual-reflector" has a top opening to pull out heated air and ozone and to draw ambient air across the belt and substrate, “cooling-while-curing".

The result of M&R innovation is a curing process that is:   
  • Cost effective  
  • Cooler   
  • Faster

Vitran's adjustable lamp can be focused to cure heat-sensitive substrates (like vinyl) or unfocused for heavier substrates (like glass or metal).

Vitran is available in a wide variety of widths to meet every print shop's needs: 24", 38", 48", 54", 60" and 72".

With all this, plus modular construction for future expansion, Vitran is not just the best choice in UV curing systems, it's the only choice!

Vitran

Standard Features

Air Handling:
  • unique approach removes heat and ozone buildup
  • powerful turbines help keep substrate cool while firmly holding down even lightweight or edge-curled stock


Belt Operation:

  • driven by reliable heavy duty DC motor
  • heat resistant, Teflon-coated fiberglass belt
  • variable speed drive and 6" aluminum rollers insure consistent belt tracking

Belt Widths: 24", 38", 48", 54", 60" and 72"


Bulbs:

  • adjustable-focus UV bulb adapts to both heat-sensitive and heat-receptive stock
  • elapsed digital time meter monitors bulb life
  • hinged bulb access for easy maintenance
  • single or double bulb models


Construction:

  • assembled and tested at M&R's factory to assure successful turn-key operation
  • heat chamber entry/exit openings are adjustable
  • modular construction lets you expand as your needs grow
  • rigid steel exterior construction

Control Center:

  • air-cooled cabinet assures long life for electrical components
  • belt speed controller is solid-state with digital display
  • cool-down mode is automatic
  • digital amp meter
  • mobile control cabinet for easy operator access
  • variable belt speed control


Electrical Controls: UL listed
Entry/Exit Shield: adjustable
Safety: interlock system with audible alarm automatically shuts down lamp when reflector
  hood is lifted
Service: 24-hour hotline
Training: access to M&R's Training Center (1, 3 & 5 day courses)
UV Settings: selectable at 125, 200 and 300 watts per inch
UV Head Positioning: adjustable
Warranty: One-year limited

Specifications

Model Lamp & Belt Width Lamps Belt Length Electrical
Requirements		 Weight

Vitran 24-10

 24" (.61 m) 1

10'
(3.05 m)

 208/230v, 1 ph,
52/48 amps

1400 lbs
(635 kg))

Vitran 24-15-2

 24" (.61 m) 2 15'
(4.57 m)		 208/230v, 1 ph, 104/96 amps 2200 lbs
(998 kg)

Vitran 38-10

 38" (.97 m) 1

10'
(3.05 m)

 208/230v, 1 ph, 74/69 amps

1600 lbs
(726 kg)

Vitran 38-15-2

 38" (.97 m) 2

15'
(4.57 m)

 208/230v, 1 ph, 148/138 amps

2500 lbs
(1134 kg)

Vitran 48-10

 48" (1.22 m) 1

10'
(3.05 m)

 208/230v, 1 ph, 97/89 amps

1800 lbs
(816 kg

Vitran 48-15-2

 48" (1.22 m) 2

15'
(4.57 m)

 208/230v, 1 ph, 194/178 amps

2800 lbs
(1270 kg)

Vitran 54-10

 54" (1.37 m) 1

10'
(3.05 m)

 208/230v, 1 ph, 117/106 amps

2100 lbs
(953 kg)

Vitran 54-15-2

 54" (1.37 m) 2

15'
(4.57 m)

 208/230v, 1 ph, 234/212 amps

3100 lbs
(1406 kg)

Vitran 60-15

 60" (1.52 m) 1

15'
(4.57 m)

 208/230v, 1 ph, 117/106 amps

2300 lbs
(1043 kg)

Vitran 60-15-2

 60" (1.52 m) 2

15'
(4.57 m)

 208/230v, 1 ph, 234/212 amps

3300 lbs
(1497 kg)

Vitran 72-15

 72" (1.83 m) 1

15'
(4.57 m)

 208/230v, 1 ph, 145/128 amps

2800 lbs
(1270 kg)

Vitran 72-15-2

 72" (1.83 m) 2 15'
(4.57 m)		 208/230v, 1 ph,  290/256 amps 4000 lbs
(1814 kg)

Products manufactured by M & R Printing Equipment Inc. are offered with limited warranties against defects in materials and workmanship. If M & R Sales and Service, Inc. receives notice of such defects during the warranty period, M & R at their opinion, may repair or replace products which prove to be defective. This warranty extends to the first Buyer only and terminates if the products are transferred or sold to another entity.

Although every effort has been made to provide accurate specifications, M& R Printing Equipment Inc. does not assume any liability for damages, whether consequential or incidental, that may result from the use or misuse of the indicated specifications. M & R Printing Equipment encourages the use of a licensed electrician for the installation of electrical service to this equipment.

M & R Printing Equipment reserves the right to alter specifications in the manufacture of its products.

It is understood and agreed that Seller's liability for any equipment whether liability in contract, in tort, under any warranty, in negligence, in strict liability or otherwise shall not exceed the return of the amount of the purchase price paid by Buyer. Not withstanding the foregoing provision, under no circumstances shall Seller be liable for special, indirect or consequential damages. The price stated for the equipment is a consideration in limiting Seller's liability. No action regardless of form, arising out of the transactions under this Agreement may be brought by Buyer more than one (1) year after the cause of action has occurred. Our warranty as specified is exclusive and no other warranty, whether written or oral, is expressed or implied. M & R specifically disclaims the implied warranties of merchantability and fitness for a particular purpose.

 

Top of page

<<Previous page

ScreenPrinting Products-SD
858.547.9997
Fax: 858.547.9998

7130 Miramar Road, Suite 400-B
San Diego, CA  92121

Contact Us: sales@screenprintingonline.com
www.screenprintingonline.com