ScreenPrintingOnline.com

<<Previous page

 

Saturn is the affordable, small format printer with the speed and print quality typically associated with larger, more expensive presses.

Instead of the cams and levers traditionally found on presses of this size, the innovative Saturn uses one motor for press “lift-and-lower" and another for “print / flood". These motors operate independently to provide an unsurpassed level of speed, efficiency, flexibility and print quality.

Saturn features a digital keypad with alphanumeric display to allow easy programming. The control center also provides self-diagnostics and a production speed monitor for more accurate job costing. Set-up is quick and easy with Saturn's micro-registration adjustments and visual guides. If you want a graphic press that's small in format but large in features and quality, you'll find that Saturn runs rings around the competition.

Saturn is available in 15" x 26", 25" x 38" and 30" x 40" print sizes.

Saturn includes:
  • 2" thick all aluminum vacuum bed
  • Adjustable front and rear print stroke sensors
  • Dynamic peel
  • Heavy duty “chatter-free" design
  • One-year limited warranty
  • 24-hour service hotline


Independent squeegee / floodbar pressure adjustment for better ink deposit control

Standard Features

Construction: rigid steel and aluminum
Control Center:
  • cycle speed adjustable from control panel
  • digital keypad with alphanumeric display
  • digital microprocessor
  • flood / non-flood setting leaves screen flooded or unflooded after print cycle
  • head up/down settings allow press to cycle without printing
  • programming & prompts in “plain language"
  • production speed monitor for more accurate job costing
  • self-diagnostics

Electrical Controls: CE and UL listed
Master Frame:

  • adjustable holder accommodates a wide variety of screen sizes
  • detaches from raised head for easy access

Off-Contact Settings:

  • four corner off-contact settings allow quick and accurate screen placement at all four corners
  • “zero" off-contact capability offers greater control over print quality

Peel: adjustable and dynamic
Print Carriage:

  • dynamic braking to keep print carriage out of printing area
  • heavy duty “chatter-free" design
  • independent drives for print carriage and head lift

Print Sizes Available:15" x 26", 25" x 38" and 30" x 40"
Print Stroke Sensors: adjustable front and rear sensors
Registration: master frame with micro-registration adjustments and visual guides allow quick and easy set-up
Safety: wrap-around safety bar has dynamic braking with reversing of print head
Screen Holders: adjustable screen holders accommodate a wide variety of screen sizes
Service: 24-hour hotline
Squeegees / Floodbars:

  • adjustable pneumatic squeegee pressure equalizer maintains uniform pressure across length
      of squeegee
  • calibrated independent and micro-adjustable pressure settings
  • independent print / flood speed controls
  • pressure and angle adjustments independently set for superior print quality
  • tool-free squeegee / floodbar adjustment

Stroke Length Sensors: tool-free stroke sensors located on print head
Training: access to M&R's Training Center (1, 3 & 5 day courses available)
Vacuum Bed:

  • computer-drilled anodized aluminum vacuum bed, engineered to stay flat
  • 2" thick all aluminum with heavy gauge construction

Vacuum System:

  • blow-back and vacuum pressure control easily adjusts to different stock types and thicknesses
  • high volume system
  • direct access for easy set-up and adjustment

Warranty: One-year limited

Options & Accessories

Foot Pedal: single-stage foot pedal to control press operation
Off-Contact Settings: tool-free version
Registration Pins: round or square
Screen Clamps: pneumatic clamps securely lock frame in place
Squeegees / Floodbars: pneumatic squeegee / floodbar air locks (includes tool-free angle adjustment)
Takeoff: fully adjustable gripper-style

Specifications
 

Maximum
Image
Maximum OD
Frame Size
Vacuum OD
Bed Size
Electrical
Requirements
Total
Floor Area

15" X 26"
(38 X 66 cm)

32" X 38" X 2.25"
(81 X 97 X 5.7 cm)
25" X 32"
(64 X 81 cm)

110v, 1 phase,15 amps, 60 Hz

50" X 41"
(1.27 X 1.04 m)

25" X 38"
(64 X 97 cm)

42" X 50" X 2.25" (106 X 127 X 5.7 cm) 35" X 44"
(89 X 112 cm)
110v, 1 phase,15 amps, 60 Hz 60" X 53"
(1.52 X 1.35 m)

30" X 40"
(76 X 102 cm)

47" X 52" X 2.25"
(121 X 133 X 5.7 cm)
40" X 44"
(102 X 112 cm)
110v, 1 phase,15 amps, 60 Hz 60" X 53"
(1.52 X 1.35 m)

 

Maximum
Image
Takeoff Takeoff  Electrical Air @
100PSI
Weight

15" X 26"
(38 X 66 cm)

30" X 72"
(.76 X 1.83 m)

110v, 1 phase,
4 amps, 60 Hz
3 scfm 1200 lbs
(544 kg)

25" X 38"
(64 X 97 cm)

41" X 97"
(1.04 X 2.46 m)
110v, 1 phase,
4 amps, 60 Hz
3 scfm 1400 lbs
(635 kg)

30" X 40"
(76 X 102 cm)

46" X 97"
(1.17 X 2.46 m)
110v, 1 phase,
4 amps, 60 Hz
3 scfm 1600 lbs
(726 kg)


Products manufactured by M & R Printing Equipment Inc. are offered with limited warranties against defects in materials and workmanship. If M & R Sales and Service, Inc. receives notice of such defects during the warranty period, M & R at their opinion, may repair or replace products which prove to be defective. This warranty extends to the first Buyer only and terminates if the products are transferred or sold to another entity.

Although every effort has been made to provide accurate specifications, M& R Printing Equipment Inc. does not assume any liability for damages, whether consequential or incidental, that may result from the use or misuse of the indicated specifications. M & R Printing Equipment encourages the use of a licensed electrician for the installation of electrical service to this equipment.

M & R Printing Equipment reserves the right to alter specifications in the manufacture of its products.

It is understood and agreed that Seller's liability for any equipment whether liability in contract, in tort, under any warranty, in negligence, in strict liability or otherwise shall not exceed the return of the amount of the purchase price paid by Buyer. Not withstanding the foregoing provision, under no circumstances shall Seller be liable for special, indirect or consequential damages. The price stated for the equipment is a consideration in limiting Seller's liability. No action regardless of form, arising out of the transactions under this Agreement may be brought by Buyer more than one (1) year after the cause of action has occurred. Our warranty as specified is exclusive and no other warranty, whether written or oral, is expressed or implied. M & R specifically disclaims the implied warranties of merchantability and fitness for a particular purpose.


 

Top of page

<<Previous page

ScreenPrinting Products-SD
858.547.9997
Fax: 858.547.9998

7130 Miramar Road, Suite 400-B
San Diego, CA  92121

Contact Us: sales@screenprintingonline.com
www.screenprintingonline.com